Technical Data
The 3200i/8 is one of the Sprint Electric Open Chassis Mount DC Drives range of products
Ratings
AC Supply Range | Typical Armature Voltage | Max Continuous Armature Current | Nominal Power |
---|---|---|---|
200 to 264v | 180v | 8A | 1.1KW / 1.5HP |
360 to 440v | 320v | 8A | 2.2KW / 3HP |
Dimensions
Height | Width | Depth |
---|---|---|
150mm | 200mm | 110mm |
AT A GLANCE
-Fully isolated control electronics
-Numerous inputs and outputs for complex system applications
-Overspeed limit
-Over torque limit
-Inverse time overload
-50% stall threshold
-Phase angle clamp
-Precision Reference
-Precision tach rectifier
TECHNICAL HIGHLIGHTS
-Torque control input for basic winding or tension control, with overspeed limiting
-Switch selectable Tach or Armature voltage feedback
-Volt free change over contacts for zero speed and/or stall
-PLC compatible input and output signals
-Extra 50% peak torque for 30secs prior to stall trip operation
-On board relay indicates zero speed and/or motor overload
SIGNAL INPUTS:
-Speed
-Torque
-Auxiliary speed inputs +ve and -ve
-4-20mA and 0-20mA
-Drive run
-Tachogenerator
SIGNAL OUTPUTS:
-Speed
-Current
-Setpoint ramp
-Total demand
-Zero speed and stall relay driver
– +/-12 +/- 24v rails
Datasheets
Single Phase DC Motor Control Product Catalogue
Where DC Digital Drives are used
Accessories
3200i/8
Small footprint speed controller for permanent magnet or shunt wound motors up to 2.2KW. Isolated. 1Q. Up to 8A output. 2ph 240 - 415V input, up to 320VDC output voltage.
More