[Skip to Content]
Select language
Select language

340/680/1220 Series

Ultra-compact 1Q / 4Q DIN-rail mount DC Drives

Low cost DC motor control for brushed permanent magnet or wound field DC motors

This comprehensive range of DC Drives offers both non-isolated and isolated drives up to 12.2A output current, suitable for DC motors up to 1.8kW (2.0Hp) output power.

The product range is available with a wide range of input voltage options, from the standard 110 – 240VAC through to 30V – 60VAC options that can provide output voltage down to 24VDC. The 340/680/1220 Series is an ideal low-cost drive solution to control small brushed or permanent magnet DC motors.

Extremely compact

The 340/680/1220 series DC Drive provides effortless control of motors up to 1.8kW in a footprint from just 35mm x 105mm. The compact DIN rail-mounting package uses less panel space than conventional chassis mount drives. Each drive comes with easy to access drive adjustments together with plug-on screw terminals for easy installation.

Low voltage as standard

The 340/680/1220 series DC Drive is available with a single phase 110V – 240VAC input voltage option (for output voltages 90V - 180VDC), or alternatively comes with a 30V – 60VAC input option (for up to 24V - 48VDC output. An ideal match for most common small DC motor windings.

Single (1Q) or 4 Quadrant Motor Control

Available in non-isolated 1Q, isolated 1Q and 4Q options, the 340/680/1220 series provides a wide range of options for any budget. The 4 Quadrant variant (XRi) regenerative DC motor controller gives a fast controlled response over the full forward/reverse speed range for motoring and braking. This improves energy efficiency by regenerating energy into the mains supply whilst under braking. The energy invested accelerating the load mass is recovered when braking. There is no dissipation of energy in wasteful braking resistors.

Other Features & Benefits

ALL MODELS: 340, 680, 1220 SERIES

340 controller for DC motors rated up to 3.4 Amps (0.55KW/0.75HP)
680 controller for DC motors rated up to 6.8 Amp (0.75KW/1HP)
1220 controller for DC motors rated up to 12.2 Amps (1.8KW/2HP)
DIN rail mounting
Easy to access drive adjustments
Plug-on screw terminals
Small footprint – 105 x 35/45/60/70 x 120(mm) H x W x D
UL, CuL and CE approved

Technical highlights: 340, 680, 1220 series

Switch selectable Tach or Armature voltage feedback
Adjustable IR compensation for improved AVF speed regulation
Selectable dual voltage ac supply

User adjustable:

Ramp
Max motor speed
Min motor speed
IR comp
Max motor current

 

340, 680, 1220 MODELS

Aux speed trim input available in AVF mode
Plug in terminals
Can also drive universal motors

PLUS 340i, 680i, 1220i & 340XRi, 680XRi, 1220XRi MODELS ONLY

150% overload with stall protection
Push-button reversing function

User adjustable [i & XRi MODELS ONLY]:

Up ramp
Down ramp
Stability
Imax
AVF/Tach switch
Speed range switch
AC voltage selector
Signal level comparator

340XRi, 680XRi, 1220XRi MODELS ONLY

Built-in current limit protection
Can be used as a torque controller
Ramped input +/- Signal terminals

Signal Terminals [i & XRi MODELS ONLY]:

+10V ref
Min speed
Ramped Input+
Output +/-
Common
Input +/-
Pushbutton +
Pushbutton –
Run input
Common
Tach input
Level output
Level input
Overload output
Trip output
Ramp output
Demand output
Speed output
Current output
+ Speed input
Torque input

 

Downloads

Where DC Digital Drives are used

Sprint Electric Guide Where DC Digital Drives are used

340, 680, 1220 SERIES product datasheet

340, 680, 1220 SERIES product datasheet

340i, 680i, 1220i product datasheet

340i, 680i, 1220i SERIES product datasheet

340XRi, 680XRi, 1220XRi product datasheet

340XRi, 680XRi, 1220XRi SERIES product datasheet

Single Phase DC Motor Control Product Catalogue

A4 catalogue of our range of single phase DC motor controllers HA105134 v5

340 680 1220 Manual

340 680 1220 Product Manual by Sprint Electric - HG105266EN00 Issue 1-v2 DC drives | Non isolated | DIN rail mounting

340i 680i 1220i Manual

340i 680i 1220i Product Manual by Sprint Electric - HG105268EN00 Issue 1-v2 Isolated | DIN rail mounting

340i 680i 1220i Applications Manual

340i 680i 1220i Applications Manual by Sprint Electric - HG102957 ISS3 Isolated range of DC motor controllers

340XRi 680XRi 1220XRi Manual

340XRi 680XRi 1220XRi Product Manual by Sprint Electric - HG105268EN00 Issue 1-v2

340XRi 680XRi 1220XRi Applications Manual

340XRi 680XRi 1220XRi Applications Manual by Sprint Electric - HG102956 ISS4 Isolated range of DC motor controllers

Product Showcase

1220

Ultra compact DIN rail mounted 1Q DC Drive. Non-isolated electronics providing up to 12.2A output current, suitable for DC motors up to 1.8kW output power.

More

1220i

Ultra compact DIN rail mounted 1Q DC Drive. Isolated electronics providing up to 12.2A output current, suitable for DC motors up to 1.8kW output power.

More

1220iLV

Ultra compact DIN rail mounted 1Q DC Drive. Isolated electronics providing up to 12.2A output current. Low voltage 30V-60VAC option providing 24-48V DC output voltage.

More

1220LV

Ultra compact DIN rail mounted 1Q DC Drive. Non-isolated electronics providing up to 12.2A output current. Low voltage 30V-60VAC option providing 24-48V DC output voltage.

More

1220XRi

Ultra compact DIN rail mounted 4Q DC Drive. Isolated electronics providing up to 12.2A output current, suitable for DC motors up to 1.8kW output power.

More

1220XRiLV

Ultra compact DIN rail mounted 4Q DC Drive. Isolated electronics providing up to 12.2A output current. Low voltage 30V-60VAC option providing 24-48V DC output voltage.

More

SUBSCRIBE TO OUR NEWSLETTER

Sign up for Sprint Electric news direct to your inbox below. We won’t spam you and you can unsubscribe at anytime.