3200i/16LV60
Small footprint speed controller for permanent magnet or shunt wound motors. Isolated. 1Q. Up to 16A output. Low voltage 30V-60VAC option providing 24-48V DC output voltage.
Technical Data
The 3200i/16LV60 is one of the Sprint Electric Open Chassis Mount DC Drives range of products
Ratings
| AC Supply Range | Typical Armature Voltage | Max Continuous Armature Current | Nominal Power |
|---|---|---|---|
| 200 to 264v | 180v | 16A | 2.2KW / 3HP |
| 360 to 440v | 320v | 16A | 4KW / 5.3HP |
Dimensions
| Height | Width | Depth |
|---|---|---|
| 150mm | 200mm | 110mm |
AT A GLANCE
-Fully isolated control electronics
-Numerous inputs and outputs for complex system applications
-Overspeed limit
-Over torque limit
-Inverse time overload
-50% stall threshold
-Phase angle clamp
-Precision Reference
-Precision tach rectifier
TECHNICAL HIGHLIGHTS
-Torque control input for basic winding or tension control, with overspeed limiting
-Switch selectable Tach or Armature voltage feedback
-Volt free change over contacts for zero speed and/or stall
-PLC compatible input and output signals
-Extra 50% peak torque for 30secs prior to stall trip operation
-On board relay indicates zero speed and/or motor overload
SIGNAL INPUTS:
-Speed
-Torque
-Auxiliary speed inputs +ve and -ve
-4-20mA and 0-20mA
-Drive run
-Tachogenerator
SIGNAL OUTPUTS:
-Speed
-Current
-Setpoint ramp
-Total demand
-Zero speed and stall relay driver
– +/-12 +/- 24v rails
Datasheets
Single Phase DC Motor Control Product Catalogue
A4 catalogue of our range of single phase DC motor controllers
HA105134 v5
Where DC Digital Drives are used
Sprint Electric Guide Where DC Digital Drives are used
Accessories
3200i/16LV60
Small footprint speed controller for permanent magnet or shunt wound motors. Isolated. 1Q. Up to 16A output. Low voltage 30V-60VAC option providing 24-48V DC output voltage.
More
