1600i
Small footprint speed controller for permanent magnet or shunt wound motors up to 2.2KW. Isolated. 1Q. Up to 16A output.
Technical Data
The 1600i is one of the Sprint Electric Open Chassis Mount DC Drives range of products
Ratings
| AC Supply Range | Typical Max Armature Voltage | Max Continuous Armature Current | Nominal Power |
|---|---|---|---|
| 100 to 130v | 90v | 16A | 1.1KW / 1.5HP |
| 200 to 264v | 180v | 16A | 2.2KW / 3HP |
Dimensions
| Height | Width | Depth |
|---|---|---|
| 150mm | 150mm | 90mm |
AT A GLANCE
-Control DC motors rated up to 16 Amps (2.2KW/3HP)
-Fully isolated controller
-Compact DC drive
-Switched maximum current ranges for easy matching to motor current rating
-Suitable for permanent magnet, shunt wound or universal motors
TECHNICAL HIGHLIGHTS
-On board relay indicates zero speed and/or motor overload
-PLC compatible input and output signals
-Precision tacho rectifier
-Numerous inputs and outputs for complex system applications
-Torque control input for basic winding or tension control, with overspeed limiting
-Extra 50% peak torque for rapid acceleration or shock loads
-Switched maximum current ranges for easy matching to motor current rating
-Switch selectable Tacho or Armature voltage feedback
-Adjustable Stability control for optimum motor response
-Extra 50% peak torque for 30 seconds prior to stall trip operation
USER ADJUSTABLE PRESETS FOR:
-Up ramp
-Down ramp
-Max motor speed
-Min motor speed
-IR comp
-Stability
-Max motor current
-Up ramp
-Down ramp
-Max motor speed
-Min motor speed
-IR comp
-Stability
-Max motor current
Datasheets
Single Phase DC Motor Control Product Catalogue
A4 catalogue of our range of single phase DC motor controllers
HA105134 v5
Where DC Digital Drives are used
Sprint Electric Guide Where DC Digital Drives are used
Accessories
1600i
Small footprint speed controller for permanent magnet or shunt wound motors up to 2.2KW. Isolated. 1Q. Up to 16A output.
More
