Model 3200i - DC Motor Control Up To 48 Amps (11KW/15HP)

Model 3200i - 1 Quadrant        

Available in four current outputs up to 48 Amps, to closely match your motor requirements. To make installation easier, you can quickly connect using screw terminals.

Easy to access control terminals, extensive features and I/O make this range of DC motor controllers an industry standard.

With line-to-line or line-to-neutral operation up to 48 Amps, you can use this controller in a wide range of motor control applications. You can also integrate this motor controller with other drives and electrical equipment. The 3200i is a fully isolated DC motor controller.

Single Phase DC Motor Control Brochure

A4 brochure of our range of single phase DC motor controllers.


Request Pricing

Available from stock. For pricing, enquire now


Technical Information

At a glance: Model 3200i

  • Four models:
    • 8 Amps (2.2KW/3HP)
    • 16 Amps (4KW/6.5HP)
    • 32 Amps (7.5KW/10HP)
    • 48 Amps (11KW/15HP)
  • Fully isolated control electronics
  • 150 x 200 x 110 (mm) H x W x D
  • Numerous inputs and outputs for complex system applications

Other features

  • Overspeed limit
  • Over torque limit
  • Inverse time overload
  • 50% stall threshold
  • Phase angle clamp
  • Precision Reference
  • Precision tach rectifier

Technical highlights: Model 3200i

  • Torque control input for basic winding or tension control, with overspeed limiting
  • Switch selectable Tach or Armature voltage feedback
  • Volt free change over contacts for zero speed and/or stall
  • PLC compatible input and output signals
  • Extra 50% peak torque for 30secs prior to stall trip operation
  • On board relay indicates zero speed and/or motor overload

Signal inputs:

  • Speed
  • Torque
  • Auxiliary speed inputs +ve and -ve
  • 4-20mA and 0-20mA
  • Drive run
  • Tachogenerator

Signal outputs:

  • Speed
  • Current
  • Setpoint ramp
  • Total demand
  • Zero speed and stall relay driver
  • +/-12 +/- 24v rails

A closer look: More technical details

Download the 3200i product manual.

Power Ratings

Model

AC Supply Range

Typical Armature Voltage

Max Continuous Armature Current

Nominal Power

3200i/8

200 to 264v

180v

8A

1.1KW / 1.5HP

360 to 440v

320v

2.2KW / 3HP

3200i/16

200 to 264v

180v

16A

2.2KW / 3HP

360 to 440v

320v

4KW / 5.3HP

3200i/32

200 to 264v

180v

32A

4.5KW / 6.5HP

360 to 440v

320v

7.5KW / 10HP

3200i/48

200 to 264v

180v

48A

7KW / 10HP

360 to 440v

320v

11KW / 14.6HP

Low voltage 30/60V AC supply version available for 24/48V DC motors

Models also available for 110V AC operation.

Download The 3200i Manual & Brochure

3200i Manual

English version manual for the 3200i.

Single Phase DC Motor Control Brochure

A4 brochure of our range of single phase DC motor controllers.

Industry Applications

With small footprints, easy to integrate I/O and flexible configuration, the possibilities are vast. Here are three example applications you can use this product with:

Metals

Metals

Learn about the DC drives and DC motor control applications in Metals processing

Plastics

Plastics

Learn about the DC drives and DC motor control applications in Plastics

Paper

Paper

Learn about the DC drives and DC motor control applications in Paper Industry

More Information

Talk To A Drives Expert

Discuss your requirements and answer your questions.

Get in touch

Find a Distributor

Search for a Sprint Electric Authorised DC drives distributor near you.

Search now