200XLV Controller 2 Amps

Model 200 XLV - Linear DC Motor Control Up To 2 Amps

Model 200XLV - uses DC supply source from 12 - 48 Volts

Model 200 XLV - Linear DC Motor Control Up To 2 Amps

High Res Images

200xlv

For your applications where you require a battery or unregulated DC source. The 200xlv will motor and brake in both directions of rotation.

Able to fit in the palm of your hand, this DC motor controller is ultra compact.

A cost effective way for you to control small low voltage brushed DC motors or gearmotors up to 48 Volts. Provision for back panel or DIN rail mounting means you can install quickly. And Plug-in screw terminals make it easier to use.

This model is ideal for installations that require low electrical noise operation. e.g. security cameras, XY tables.

At a glance: Model 200XLV

Ideal for small DC motors and linear actuators up to 48V
Motor and brake in both directions
Fast response
Dimensions 82 x 40 x 50 (mm) H x W x D
Easily interfaced for limit switch operation
High bandwidth with linear output
Ideal for noise sensitive applications

Technical highlights: Model 200XLV

+ve and -ve differential speed inputs
Current limit protection
Armature or tach feedback operation
Setpoint ramp facility
Accepts bipolar or unipolar command inputs
Adjustable IR compensation for improved AVF speed regulation
+/-2A output, with 150% overload capability
Built in thermal protection with resettable trip
3 term PID control action
Position control facility

	Download the Model 200XLV product manual – click here to visit our technical support section
	Download the Model 200XLV datasheet – click here to visit our technical support section
	Click here to make an enquiry
	Click here for Model 200XLV product updates (RSS)

Voltage Limit	Current Limit	Input Supply	Presets	References	Speed Inputs	Control Action
For DC motors with a maximum voltage ratings from +/-6V up to +/-48V	0 to +/-2 amps continuous, +/-3 amps peak.	12 to 48V DC, +/-25%.	Max speed limit IR comp 0 to 6 ohms	Precision current limited voltages references +10V, +5V, 5mA max.	Differential inputs.	P or P+I or PID, armature, tacho or position feedback.